Startsida Utforska Hjälp
Logga in
curiousmuch
/
ideasX-encoder-firmware
1
0
Fork 0
Filer Ärenden 0 Pull-förfrågningar 0 Wiki

Firmware for v0.3.X IdeasX module.

Träd: 032ea96303
Grenar Taggar
ideasX-encod...
ZIP TAR.GZ
curiousmuch 032ea96303 Added README.md 6 år sedan
driver d1a7fdde4c Added UART interface. 6 år sedan
gdbstub 542f63e5b4 init commit 6 år sedan
hal 542f63e5b4 init commit 6 år sedan
include d1a7fdde4c Added UART interface. 6 år sedan
interface d1a7fdde4c Added UART interface. 6 år sedan
log 542f63e5b4 init commit 6 år sedan
mqtt 542f63e5b4 init commit 6 år sedan
user d1a7fdde4c Added UART interface. 6 år sedan
util 542f63e5b4 init commit 6 år sedan
.gitignore d1a7fdde4c Added UART interface. 6 år sedan
Makefile d1a7fdde4c Added UART interface. 6 år sedan
README.md 032ea96303 Added README.md 6 år sedan

README.md

IdeasX Module Firmware Repository (v0.3.X)

This repository holds the firmware for first IdeasX Encoder labeled the module. The module is a portable battery powered ESP8266 based device which contains the following hardware:

  • 700mAh re-chargeable battery
  • 80MHz 32-bit processor + Wi-Fi radio
  • Integrated battery charger
  • Battery gas gauge
  • 6-axis IMU (accelerometer and gyroscope) with integrated 8kB FIFO
  • Barometer
  • USB to UART converter for programming / debugging
  • RGB status LED
  • 2 3.5mm mono audio jack for use with industry standard switches / buttons

Hardware Design

The schematics and PCB were designed in KiCad. I'm currently working on cleaning up the files / integrating them into a Git repo so they can be uploaded on GitHub. (Bothering me will likely accelerate this.)

Firmware Specifics

The firmware is based on tuanpm's MQTT repository (thanks man!). It's been heavily modified to suit the requirements of IdeasX. The esp-open-sdk is used to build the firmware. The latest version of the SDK is always used.

You can learn more about IdeasX, Encoders, and the module here.